Armstrong Clark Oil Based Wood Deck Stains

Paver Sealer Remover Stripper

by Administrator

Paver Sealer Turned WhiteBrick Paver Sealer Remover and Stripping Instructions

Brick pavers can make beautiful exterior surfaces from driveways and sidewalks to patios and landscape walls. Sealing brick pavers can enhance their natural beauty and provide lasting protection from Mother Nature.

There are many types of brick paver sealers. Water based, oil based, and acrylic sealers are just a few examples. They can come in many finishes from matte to a glossy “wet look.” No brick paver sealer will last forever so maintenance becomes a necessity.

When an old brick paver sealer simply wears off and fades away the surface can be cleaned and refinished with a new brick paver sealer. But sometimes brick paver sealers can fail prematurely. This happens for several reasons.

 

Over application is a common occurrence. This causes the brick paver sealer to turn white or yellow as it becomes an eyesore. A cheap or inferior paver sealer may also fail before you expect it to. Moisture is also an enemy of a brick paver sealer and can cause a sealer to fail.

When a brick paver sealer fails it is necessary to remove it before you can reapply and a new coat of paver sealer. RAD PaintStrip Brick Paver Sealer Remover is the only product on the market that will remove most acrylic “wet look” brick paver sealers.

This brick paver sealer remover is user-friendly and applies in a few easy steps.

1. Roll the brick paver sealer remover onto the failed sealer. Best to apply in sections of about 100 sq. feet at a time. This will allow the stripper to stay active and not dry out.

2. Let the sealer remover dwell on the failed paver sealer for 15-20 minutes.

3. Pressure wash the brick paver surface. Reapply to stubborn areas as needed.

Brick paver sealer remover coverage rates can vary depending on the sealer being removed. Check the coverage rates for the product you use. Always follow the manufacturers instructions and wear protective gear when handling.

After all the existing failed brick paver sealer is removed rinse the surface thoroughly and let the brick pavers dry for 1-2 days prior to re-sealing.

Keeping your brick pavers sealed and maintained improves their appearance and longevity. It is a great way to protect your investment and by following these guidelines and using a quality brick paver sealer remover it can be an easy weekend project.

Any Questions On Removing a Failed Paver Sealer? Just Ask Below

Subscribe
Notify of
guest
82 Comments
Newest
Oldest
Inline Feedbacks
View all comments
Eric
Eric
1 year ago

Hi!.We had a company come out and do a TERRIBLE job (see photos). Now I need to strip the entire patio! Also, there is polymeric sand in between the joints that needs to come out. What is the best stripper for this? 

Ed McDonald
Ed McDonald
1 year ago

I used Masonry Defender Low Gloss Paver Sealer and applied it to pavers that were not real dry. Maybe over applied in certain areas because spryer tip was not working well. White residue has covered large portions of the paver area. How can I fix this problem 

Avatar photo
Admin
1 year ago
Reply to  Ed McDonald

Strip it all off and start over. You cannot apply the sealer to damp pavers, it will blush.
https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon

Avatar photo
Admin
1 year ago

We do not have samples of the stripper to test.

robert cipolla
robert cipolla
1 year ago

i would like to remove Black Diamond Dominator water based gloss sealer . I have about 800 sq ft

Melissa
Melissa
1 year ago

We stained our concrete pavers the perfect color using Direct Colors Acid Stain.  Then we made the mistake of sealing them with the same company’s sealer. The sealer turned the pavers very dark and shiny.  Can we use this remover to restore the unsealed look?

Avatar photo
Admin
1 year ago
Reply to  Melissa

Depends on the sealer brand and type that was used?

Melissa
Melissa
1 year ago
Reply to 

Direct Colors’  Easyseal, solvent-based acrylic satin outdoor sealer

Avatar photo
Admin
1 year ago
Reply to  Melissa

It will remove the sealer but it may also take off some of your stain.

Becca
Becca
1 year ago

What’s the best sealer remover for oil based?

Avatar photo
Admin
1 year ago
Reply to  Becca

What type of sealer and brand are you trying to remove? The “base” is not applicable.

Becca
Becca
1 year ago
Reply to 

It was on there when we purchased the house.  We don’t have information of the type or brand.  We had someone test it and they said it was an oil base.  It’s very white between pavers around the pool.  They want $3 per foot and we have appx. 3000 sq ft.  Thinking we will do spot sealant remover where it needs it ourselves before having it resealed.  Just don’t know what kind to use.

Avatar photo
Admin
1 year ago
Reply to  Becca

You cannot spot strip. It will all have to be stripped. You can post pictures of the issues here in the comments.

Frank Tiberio
Frank Tiberio
1 year ago

Will this takeoff experiences from pavers

Avatar photo
Admin
1 year ago
Reply to  Frank Tiberio

???

Aaron
Aaron
2 years ago

I have an apt in a NYC building. sadly, big walls of red brick were sealed with a glossy finish. prior to that, the brick was an array of beautiful natural colors that had been assembled and faded over 100 years… do you have any products and advise for me to remove brick sealer to get rid of the now glossy and dark red finish?? I’m desperate to restore the brick back to its original glory… thank you!! Aaron

Avatar photo
Admin
2 years ago
Reply to  Aaron

Post pictures.

Dennis
Dennis
2 years ago

I have Eagle Solvent -based sealer on a brick patio.  I am trying to remove the sealer.  Will your product do that?

Avatar photo
Admin
2 years ago
Reply to  Dennis

Yes.

Denny
Denny
2 years ago

I bought 2 gallons of sure strip to remove diamond sealer off my brick pavers. I ve done it 4 times and still have lots of sealer showing. Do you have a stronger remover I can use. Thanks Denny 

Avatar photo
Admin
2 years ago
Reply to  Denny

We do not. Make sure to pressure wash off after applying.

Tom Holliday
Tom Holliday
2 years ago

What is the best sealer removal? 

Austin
Austin
2 years ago

I sealed my covered patio 48 hours ago and it’s still pretty tacky. I think I used too much and may need to remove it. How long before the tackiness should wear off?

Avatar photo
Admin
2 years ago
Reply to  Austin

Depends on the sealer brand you applied. It may not cure and will need to be stripped over over applied.

Dan
Dan
2 years ago

We have pavers inside our house and can’t pressure wash.  What is the best way to remove old sealer? and also to remove stains? or is it better to just grind off the top layer of the paver?

Avatar photo
Admin
2 years ago
Reply to  Dan

Sorry but we do not sell any products that can be used indoors for this. You cannot grind this out.

Mike
Mike
2 years ago

What’s the best stripper to remove a water based sealer off of pavers need this ASAP. Please help.

Avatar photo
Admin
2 years ago
Reply to  Mike

What brand and type of sealer was it?

Mike
Mike
2 years ago
Reply to 

It was dominator high gloss wet look sealer

Mike
Mike
2 years ago
Reply to 

I only need one gallon of it and I need this for pavers not concrete

Avatar photo
Admin
2 years ago
Reply to  Mike

You can use this: https://www.brickpaversealer.com/surestrip-1-gallon
Surface type does not matter.

Vince
Vince
3 years ago
Paver guys sealed apparently clean driveway and pool pavers and days later it appears as though dirt, tire marks are sticking/appearing everywhere, looking for some type of stripper to remove old then reseal
DC
DC
3 years ago

Which product will remove an oil based paver sealer?

Avatar photo
Admin
3 years ago
Reply to  DC

This product removes solvent and water based acrylic sealers:

Paver Sealers are not considered oil based.
Vatche
Vatche
3 years ago

Hi I want to remove this white film of my Pavers what do you recommend.

Thomas ORourke
Thomas ORourke
3 years ago

Is this stripper good for removal of water based or oil based sealer removal.

Avatar photo
Admin
3 years ago
Reply to  Thomas ORourke

It removes both water and solvent-based acrylic sealers.

Annette
Annette
3 years ago

Sorry I used the product Higro paver sealer

Annette
Annette
3 years ago

I have terr cotta tile in my home used nitro paver sealer on them . Now it’s pealing need to strip sealer what do you recommend

Avatar photo
Admin
3 years ago
Reply to  Annette

Sorry, but we do not have a stripper that can be used indoors.

Alan C
Alan C
3 years ago

Will this product remove Defy Paver Sealer applied on clay bricks about 10 years ago?

Avatar photo
Admin
3 years ago
Reply to  Alan C

Yes.

David M
David M
3 years ago

Brick pavers on porch have an old Thompson’s Brick Sealer on them. Trying to remove it and reseal. Have tried recommendations from many Home Improvement Stores here locally. Some suggestions have been paint remover, mineral spirits, etc. They have helped a little, but no overall major improvements. Whitish film on the surface now of many of the bricks. Would this product take care of the job at hand? Tired of trying suggestions from these retailers that do not work!
But I know this is not an impossible task. There HAS to be some type of solution to the problem!
Thanks, in advance, for advice, suggestions, and feedback!

Avatar photo
Admin
3 years ago
Reply to  David M

Sorry but this will not strip Thompsons water sealer.

betty
betty
3 years ago

should you seal the patio before adding more sand to the pavers

Avatar photo
Admin
3 years ago
Reply to  betty

Sand first.

Scott
Scott
3 years ago

We need to strip our pavers but do not know whether the old sealer is acrylic or water based. Will the stripper mentioned here remove both acrylic and water?

Avatar photo
Admin
3 years ago
Reply to  Scott

It removes both water-based and solvent-based acrylic sealers. Acrylic is in both.

Patty Calloway
Patty Calloway
3 years ago

I applied valspar gloss sealer to my pavers and the next day there were cloudy or milky looking areas on the pavers. I have spent a lot of money trying to get these removed and not successful. What can I do to get these areas of the valspar sealer I used off. Looks terrible and not what I expected at all. I have spent lots of time trying to get this ugly site removed.

Avatar photo
Admin
3 years ago
Reply to  Patty Calloway

Post a picture.

Debbie
Debbie
3 years ago

Is zylene the same as stripper products to remove sealant such as diamond clear on brick pavers

Avatar photo
Admin
3 years ago
Reply to  Debbie

Xylene is not a stripper and is not an ingredient in our stripper.

Pat
Pat
2 years ago
Reply to 

Will your product remove Diamond Clear sealer? 

Avatar photo
Admin
2 years ago
Reply to  Pat

Yes.

Stanley Page
Stanley Page
3 years ago

where do I buy one or two gallons? I live in Salem, Ore. Use sb 8700

Last looked fine till I washed of the patio, now it is come off

Did to strip it off! stanly.page@comcast.net

Avatar photo
Admin
3 years ago
Reply to  Stanley Page

It is only sold in 5-gallon pails and only online.

Jerry maroon
Jerry maroon
3 years ago

Can I use a paver stripper for pavers around my pool? Will damage the pool if it gets into pool water?

Avatar photo
Admin
3 years ago
Reply to  Jerry maroon

You cannot wash the stripper or the sealer residue you are removing into the pool.

Patty
Patty
4 years ago

I only need a quart. Do you sell by the quart?

Avatar photo
Admin
4 years ago
Reply to  Patty

No, we do not.

Lynn eyre
Lynn eyre
5 years ago

Can I use this product to remove Thompson’s wetlook sealer?

Avatar photo
Admin
5 years ago
Reply to  Lynn eyre

It should work on this.

Lynn eyre
Lynn eyre
5 years ago
Reply to 

Do you ship to uk ?
And how much is it ?

Avatar photo
Admin
5 years ago
Reply to  Lynn eyre

No, we do not.

Avatar photo
Admin
6 years ago
Thomas Aiellos
Thomas Aiellos
6 years ago

Is there someplace in South Florida I can buy this or how long does it take to get to Florida

Avatar photo
Admin
6 years ago

Yes that is okay.

Andrew price
Andrew price
6 years ago

Was wondering that when u strip at 100 sq ft at a time and pressure wash product off. Can u start the next area if it’s wet from the over spray of pressure washer?

Avatar photo
Admin
7 years ago
Deb Spitznagle
Deb Spitznagle
7 years ago

where can I buy th e Super Seal Brick Paver Sealer Remover?

Mike D
Mike D
7 years ago

I would not say it has discolored and it has not turned white. The main reason I am asking is because the pavers just look dull and not anywhere near what they looked like three years ago. Water seems to immediately soak in as soon as I apply it to most areas. Does this mean I can just clean the deck without needing to strip it?

Mike D
Mike D
7 years ago

3 years ago when I had my patio installed using Belgard pavers. At the advice of a friend I sealed the pavers using Surebond 1300 Joint Stabilizing sealer (water based). My deck is now looking dull and has lost all of its original color vibrance. Do I need to use a sealer remover prior to using a new sealer? I would like to try a “wet look” sealer this time to bring back some of the pavers original look.

Avatar photo
Admin
8 years ago

Depends on what type of sealer it is. This sealer will remove both water and solvent based sealers that are acrylic.

Predtige
Predtige
8 years ago

Does this product work on water based sealants that are around a month old

82
0
Would love your thoughts, please comment.x