Wet Look Paver Sealers are not the same as adding a gloss or a shine. A "Wet Look" relates to the darkening of the brick similar to as if wet with water. These sealer types can also have different shine levels:

  • No gloss
  • Matte or low luster
  • Semi-Gloss
  • High Gloss.

In addition Wet Look Paver Sealants can help solidify the jointing sand between the brick paves.


Here is a list of the Wet Look Paver Sealers we sell:

SuperSeal 30

-The SuperSeal 30 is a high acrylic sealer that will darken the colors considerably while leaving a modest shine level similar to a gloss. Solvent based.

SuperSeal 25

-The SuperSeal 25 will enhance the colors of your pavers dramatically will leaving a semi-gloss shine level. This is a solvent based sealer.

SuperSeal Matte

-Same as the SuperSeal25 but with an additive to lower the shine level to a matte finish. This sealer will give a rich wet look.

MasonrySaver Paver Sealer

-Water based sealer that will leave a moderate darkening and shine level.

SB-6000 Wet Look Sealer

-SB-6000 does not leave a gloss but does enhance the color similar to as if wet. Water based.

Take inconsideration the gloss levels will vary depending on the porosity and application coverage of the sealer.


If you have a question on which sealer to use, please ask below in the comment area.

Comments (59)

Subscribe to this comment's feed

Show/hide comments
 1 2 > 
I have Nicolock pavers and want to seal them using a penetrating sealer that will enhance the color as if it were wet but not add a shine. Which one of your products do you recommend for that?
Vincent Pontillo , March 03, 2013
re: Nicolock pavers
Most wet look sealers will add a gloss. The SB-6000 would be your best bet for this.
TheSealerStore , March 03, 2013
cambridge paver blocks
i have cambridge paver patio. it is 12x17. we like the wet look which is the best sealant semi gloss or high gloss and are they water base clean up of tools.
ed leary , May 21, 2013
I would use the SuperSeal30. It is a solvent based sealer.
TheSealerStore , May 21, 2013
We have brick pavers in our lanai and around the pool. Wants to seal to keep mold and weeds out, but won't be too slippery. Not concerned about color changes.
Beth , May 24, 2013
I would look at the Surebond SB-1300 for this project.
TheSealerStore , May 25, 2013
I have brick pavers around my pool and I would like to protect and enhance the color of the pavers. I like the "wet" look. What would you recommend?
Joy Biggs , June 14, 2013
Joy, SuperSeal25 or Surebond SB-6000
TheSealerStore , June 15, 2013
Which is better
Which is better, water or solvent based sealers? Which one last the longest and provide the better protection. Is one easier to apply than the other. Thanks for your assistance.
Russell L , June 19, 2013
They are both good. Not one is better or last longer.
TheSealerStore , June 19, 2013
Brick patio pavers
Newly added brick paver pathways and patio. How often would the sealer have to be reapplied? Is there any type of guarantee on products i.e. lasting a certain amount of time?
JD , August 17, 2013
re: Brick patio pavers
Most sealers need to be reapplied every 2 years for pavers.
TheSealerStore , August 18, 2013
Home owner
I have pavers on my driveway that have lightened from water under my gutters.
If I apply a sealer won't the lightened pavers still look light? Can I darken the pavers to look like all the others?
L. Cabrera , August 27, 2013
If all the pavers look even when wet with water that applying a wet looks sealer to all the pavers will even it out and enhance the appearance. You cannot "spot" treat just those pavers.
TheSealerStore , August 28, 2013
Using SuperSeal 25 for walls & borders of decorative.
We just finished sealing our new brick paver patio with SuperSeal 25. Love the wet look and wondering if could use SuperSeal 25 on decorative concrete walls and borders around patio & lining our driveway? Walls are stamped but top of border & walls are plain flat surface. We would like the same gloss look as the patio but wondering if it is enough protection to prevent deterioration from rain & snow?
JD , August 29, 2013
re: Using SuperSeal 25 for walls & borders of decorative.
You can apply to the Stamped Concrete but sure how it will look for the tops of the wall. I would do a test spot first.
TheSealerStore , August 29, 2013
Just completed laying 12x12 Terra Cotta pavers in my patio. Some pavers were cut to complete the edges using a dry saw that covered the existing pavers with dust. After washing off the dust the pavers dried with white residue from that dust. When wet the residue is not evident. If a sealer is applied would it show the white residue when it dries? Is there something that can remove the residue? What sealant would be best for these Terra Cotta pavers? Thank you in advance for your response.
Caribq , August 29, 2013
caribq, I would remove the residue first as it is possible it would show through the sealer. I am not sure what will remove the dust.
TheSealerStore , August 29, 2013
Fire pit blocks and top
Getting ready to seal brick paver patio and want wet look with not high gloss maybe semi. Have a connected fire pit and was wondering if I should do that too? It's the same blocks the was used for outside portion of stairs. So??
Randy , September 07, 2013
Spray or roll?
Do you suggest spraying or rolling the sealer on? How long does your shipping take and how much do you recommend for a 20x20' patio?
Thanks, Randy
Randy , September 07, 2013
re: Spray or roll?
Randy, I would not seal the blocks on the fire pit. Use the SuperSeal 25 and it can be rolled or sprayed on with the Chapin 1949 Sprayer we will sell. One 5 gallon pail will do 500 sq. feet.
TheSealerStore , September 07, 2013
Fire pit and wall
So nothing to protect fire pit and the 4' wall on each side of it? Won't it look old or out of place? Maybe semi gloss for patio and stairs and matte for pit-walls? Why not seal it?
Randy , September 08, 2013
I am looking to seal my new driveway and patio. The pavers that have been installed are Old Chicago Clay pavers. I would like to seal them so I can achieve a wet look...and a gloss finish. What product would you recommend I use?
David Z , September 09, 2013
David, I would look at the SuperSeal30 for this.
TheSealerStore , September 09, 2013
Thank you for your quick response. Is the SuperSeal30 suitable for clay brick pavers......is it breathable?
David Z , September 09, 2013
I applied two coats of superseal25 semi-gloss on a stamped concrete patio using a roller. Looks great. However there is a lawn adjacent to it where some water splashes on this patio from the sprinklers everyday. This is causing the little kids to slip a bit. Can anything be done to prevent slipping ? I am aware of the super grip additive, but did not use that since this is stamped concrete and pretty rough. Any tips ? Thanks
Khadermoh , September 28, 2013
Nothing can be done except adding grip. It is was just applied, the slipping will minimize in 2-3 weeks as it fully cures out.
TheSealerStore , September 29, 2013
how can i add grip ?
Yes, the superseal was applied 3 days ago.
Khadermoh , September 29, 2013
Have a brick paver driveway.Need to reseal, but do not know which type of sealer was used originally. We were told that the reseal must be an oil based product which will be applied at the homeowner's risk. The person we are dealing with states that the sealer that is on it, is oil based. How can he tell just by looking?
I don't know what to do. Thanks
Lynn R , October 28, 2013
re: Reseal
There are not oil based products but solvent based. No way to tell by looking.
TheSealerStore , October 29, 2013
Interlocking pavers
My backyard was covered with interlocking pavers. Id like to achieve the dark color of the pavers just like when its wet. Which product will work best to darken the color as that is my main goal? Regardless if its glossy or not.
Christine , May 11, 2014
Christine, try SuperSeal30 for this.
TheSealerStore , May 12, 2014
Does your products cover Old chicago Brick? Which product would it be?
Ted Lignieres , June 07, 2014
Ted, look at the Surebond SB-6000.
TheSealerStore , June 08, 2014
New Patio cleaning and sealing
We installed a new concrete paver walnut tinted patio earlier this summer. Want to seal it with a wet look..like the looks of the Sure Bond 6000..Currently there is some effloresence, leaf stains and a few small oil stains. Know that it is important to have it cleaned before seAling. what are your suggestions for cleaning

how long does the patio need to dry after the patio is cleaning.
Mary B. , September 12, 2014
re: New Patio cleaning and sealing
Look at the SB-488 and the SB-442 for the prep. Let dry for a couple of days after prep before sealing.
TheSealerStore , September 13, 2014
I live in the Northeast and have 6 year old cement look like bluestone pavers. I'm looking for a non slippery wet look sealer. What do you recommend and what is the best way to apply. Patio is around 650 square feet.
Steve Garrepy , May 29, 2015
Steve, look at the Surebond SB-6000 for this. Apply with a low pressure pump sprayer.
opwdecks , May 30, 2015
How much SB-6000 do I need for newly installed CST PAVER PATIO
Yules , June 11, 2015
It's 950 square feet
Yules , June 11, 2015
re: How much SB-6000 do I need for newly installed CST PAVER PATIO
10 Gallons for 2 coats on 950 s. feet
TheSealerStore , June 12, 2015
old unilock
I have a driveway and walks with unilock pavers that are about 15 years old that were never sealed will a wet look sealer help bring any of the color back out?
nate , July 09, 2015
Nate, a wet look sealer will make the pavers richer in color, similar to as if wet with water. Look at the SuperSeal25 or the SS30/
TheSealerStore , July 09, 2015
Paver patio want to enhance
We just put in 600sf patio of Belgard pavers wifeel wants to enhance give like a wetotal look. I would not like it to glossy but a little sheen is fine. Would like something that a homeowner can do him self I'm very handy. And would like it to last a while couple years. Sprinklers will hit the edges so not want real slippery when wet and the ease of recoating would be a plus
Matt p , August 31, 2015
re: Paver patio want to enhance
Try the SuperSeal Matte or the Masonry Saver Paver Sealer.
TheSealerStore , September 01, 2015
Masonry Saver Paver Sealer.
Is this a breathable sealer. Or is that not so important. I hear a lot of people talk about water trapped under finish causing a white look. I do live in CA so very strict voc
Matt p , September 01, 2015
They are both breathable. Super Seal Matte is not allowed in CA. The other is allowed in most of CA but not in the 4 counties of LA area.
TheSealerStore , September 01, 2015
Applying different Product layer
I applied 2 layers of Masonry Saver Paver Sealer to untreated stone pavers that had been in the Florida sun for 18 months. It looks great and brought back the color and left a moderate sheen. I would like to give it more of a glossier wet look. Should I add another layer of MSPS or can I add a different water based product like SB-6000?
KevinE , September 29, 2015
SB-6000 does not have any gloss. The only thing you could try is another layer of the same.
TheSealerStore , September 29, 2015
Fireplace brick wall
We have a very large brick fireplace wall with water marks from leaky roof (now fixed by previous owner). Have cleaned with detergent and vinegar. Looks great when wet but when dry still see water marks. Brick hearth seems to have some kind of sealer on it as easy to clean and has slight gloss to it. Home built in 1954 so not sure what was used on hearth. Would SB6000 be a good product for the vertical brick to give wet look without gloss? Wall is 15ft wide by 12ft tall. How many coats would I need to seal properly and make easier to clean? How much product would I need? Thanks for your help.
Mic in Texas , April 06, 2016
 1 2 > 

Write comment

You can add your comment here